The importance of apartment bed fences for students

1. The bed fence of dormitory apartment can be made of spline curve steel plate, punched steel plate, welding or woven net, etc., which can not be fake and shoddy
2. Fences should be set near the basic platform and bed. Portable forms can be carried out with other measures.

3. the dormitory apartment bed fence should also bear the 350N inertia force released by the vertical fence in the horizontal direction without causing indefinite bending, the object is a flat and flat equal-edge plane figure, the side length is 50mm, and the edge is rounded half warp is 3mm.

4. when the attachment or operation box is located in the military high and low bed guardrail inside, warm remind you should set another common area between the two to prevent, and install the clamping door.
5. The fence door should be equipped with disassembly equipment, so that the fence door can only be opened when the guardbar is located at the bottom of the required position, and the way can not run after the door is opened.
Apartment bed manufacturers
6. The suitable height and width ratio of bed fence in dormitory apartment shall not be less than 350mm.
7. The fence should be based on customer satisfaction, in the color selection, as far as possible to choose cold color, so as to improve the comfort of work.
8. The normal clearance of all beds in the dormitory apartment is about 60mm. The spacing can not be very large, otherwise consumers have standards.
Article by: Apartment bed  www.sdfumei.com Fumei seat Co., Ltd. arrangement provided, the views of this article do not represent the views of this site